Customizing Billing Periods and Payment Schedules in Contracts
Last updated: October 28, 2026
Contracts often require flexible billing arrangements — such as quarterly payments, staggered start dates, pilot periods, or deferred fees. This article explains how to use Custom Billing to handle a variety of non-standard payment schedules.
Understanding the 'Custom' Billing Frequency Label
When a subscription's billing frequency displays as Custom instead of the actual frequency (e.g., monthly, semi-annual), this indicates that the invoice amounts have been manually adjusted and differ from the default equal distribution. For example, if a semi-annual subscription's Total Contract Value (TCV) would normally be split equally across all invoices but has been modified to have higher amounts in earlier invoices and a reduced final invoice, the system will display Custom to reflect that the standard billing structure has been changed.
Troubleshooting: Custom Billing Reverting to Equal Distribution
If your custom billing schedule keeps reverting to an even split of the TCV across all invoices, this is likely caused by expired discounts on the order. The system automatically resets all custom billing configurations when expired discounts are detected.
To resolve this:
Check the order for any expired discounts.
Remove all expired discounts before configuring custom billing.
Ensure all remaining discounts are current and active.
Reconfigure your custom billing schedule after removing expired discounts.
Order Form Limitations for Non-Standard Billing Periods
The order form currently only supports presenting periods in 12-month blocks. If your contract has a non-standard length or custom period splits (e.g., a 15-month contract split into a 3-month period followed by a 12-month period), those custom period boundaries will not be reflected in the order form's period display.
Workaround: Direct customers to the Billing Schedule section of the order form rather than the period display. The billing schedule will accurately show the custom invoice dates and amounts you've configured.
Creating Non-Standard Billing Period Lengths
You can create billing periods with non-standard lengths (such as a 45-day opt-out window) by editing the start dates of periods in the custom billing schedule. When you edit the start date of a period, the system automatically sets the end date of the preceding period to the day before the new start date.
Important: Custom pricing locks billing periods to the month level. While you can adjust period start dates, periods are constrained to monthly increments, so complete day-level flexibility is not available.
Example — Annual Deal with a 45-Day Opt-Out and Quasi-Quarterly Payments:
For a $39K annual deal with a 45-day opt-out period followed by quasi-quarterly payments, you could structure billing as:
Period | Dates | Amount | Purpose |
Period 1 | 8/31 – 10/15 | $4,875 | 45-day opt-out window |
Period 2 | 10/15 – 1/31 | $11,375 | First quasi-quarterly payment |
Period 3 | 1/31 – 5/15 | $11,375 | Second quasi-quarterly payment |
Period 4 | 5/15 – 8/31 | $11,375 | Third quasi-quarterly payment |
Note on Future Start Dates: Combining future start dates with custom billing periods may cause unexpected behavior. If you encounter issues with this combination, consider restructuring the order.
Setting Up Multi-Step Payment Plans with Transition to Recurring Billing
You can use Custom Billing to create initial installment payments that then transition into a standard recurring billing structure — for example, collecting payments in specific months before shifting to an annual schedule.
Build the order with the billing frequency set to your final recurring frequency (e.g., Annually).
In the open order, select View/Update Billing Schedule.
Add custom periods for each installment (e.g., a July payment, then a January payment).
Set the remaining TCV to bill on your target recurring schedule (e.g., annually on your anniversary date).
Confirm the TCV matches the sum of all custom periods. If not, reallocate amounts until it matches.
Note: If the order was initially set to a single invoice, first change the billing frequency under Deal Setup before adding custom periods. Credit card collection will follow the custom schedule you define.
Handling Pilot or Trial Periods with Custom Billing
For contracts that include a paid pilot or trial period followed by a longer commitment, you can structure the deal as a single contract using custom billing.
Set the total contract length to include both the pilot and the full commitment period (e.g., 13 months for a 1-month pilot + 12-month contract).
Use a custom billing schedule to configure the first invoice for the pilot period amount and the second invoice for the remaining period fees.
Activate any applicable pilot or trial commercial terms on the order so the customer sees opt-out/opt-in conditions during order review before execution.
Alternative Approach: You can also structure the pilot and the main contract as two separate sequential order forms with delayed start dates — for example, a 1-month pilot as one order form and a 12-month contract as a second order form delayed by one month.
Creating Reusable Pilot Terms: To handle opt-out scenarios cleanly, create reusable commercial terms for pilot periods and upload them to the terms library. These terms should articulate opt-out/opt-in conditions, what happens at the end of the pilot, and the financial implications if the customer opts out.
If the Customer Opts Out After the Pilot:
Terminate the subscription before the next invoice is generated to prevent further billing.
If an invoice has already been generated, you can zero out the invoice amount.
Deferring Setup Fees or One-Time Charges to Future Dates
You can use custom billing to defer setup fees or other one-time charges to a future billing period without creating additional milestone line items.
Create or use an existing setup fee line item with the desired amount.
Enable Custom Billing on the order's billing schedule.
Set the setup fee amount to $0 for the initial billing period.
Add the full setup fee amount to the target future billing period.
Verify the total amount remains the same — only the timing has changed.
Customers can see the deferred billing schedule on both the PDF order form (under Billing Schedule) and the checkout link (under View Billing Schedule), making it transparent for their finance review. If the subscription is terminated before the deferred charge date, the future invoice will not be generated.
Creating Zero-Charge Periods with Custom Billing
To create invoices with $0 charges during a specific period (e.g., no charges during the first year of a multi-year deal), use custom billing rather than a ramped billing schedule.
Set the billing frequency to Quarterly (or your desired frequency).
Open the order's billing schedule and configure custom billing.
Set invoice amounts for the zero-charge period to $0.
Distribute the remaining TCV across the other billing periods.
This approach is preferable to ramping for zero-spend periods because it directly controls invoice amounts without requiring quantity or discount adjustments.
Setting Different Billing Frequencies for Individual Line Items
You can configure individual line items within the same contract to have different billing frequencies. For example, you can set one line item to bill quarterly while keeping the rest of the contract on an annual schedule — useful when a customer wants to trial a specific product on a shorter billing cycle.
Update the billing schedule for the specific line item that requires a different billing frequency (e.g., set it to quarterly).
Front-load the payment for the remaining line items that should stay on the annual schedule.
Handling Line Item Removal Mid-Contract: If a customer decides to discontinue a line item with a different billing schedule before the main contract term ends, the deal can be recast to remove that specific line item. This keeps the main subscription active and does not count as customer churn.
Setting Different Payment Terms for Individual Line Items
Only one net payment term (e.g., net-15 or net-60) can be set per order. If you need different payment terms for different line items, the standard approach is to split those items into separate orders.
One-Off Workaround for Mixed Payment Terms on a Single Order: For cases where splitting into separate orders is not practical, you can approximate different payment terms within a single order:
Define the intended payment terms for each item under the Special Terms section of the order.
Set a custom billing schedule so that different items bill on different days (e.g., subscription bills on day 1, implementation fee bills on day 2).
Contact support to manually adjust the due date on specific invoices to reflect the desired payment terms.
Note: Step 3 requires support assistance and is best suited for one-off situations rather than a repeatable workflow.
Using Ramping Structures with Discounts for Staggered Billing
As an alternative to custom billing, you can use ramping structures with percentage discounts to stagger when different line items begin billing — useful for phased implementations or delayed service start dates.
Set the billing frequency to monthly (required for period-by-period customization).
Create ramping periods that correspond to your billing schedule.
Apply discounts (0–100%) to control billing amounts per period:
Apply a 100% discount to completely waive charges for periods where a service shouldn't be billed yet.
Use partial discounts to reduce charges for specific periods.
Reduce or remove the discount in subsequent periods when the additional services should start billing.
Example: A contract renewal in October with two services — Incident Response (bills immediately in October) and On-Call Service (billing delayed until January). Set the October period with the Incident Response amount only, and apply a 100% discount to the On-Call portion for October through December. Remove the discount starting in January when On-Call billing should begin.